The new Antilaser AL-Priority has been improved once again compared with its predecessors AL-G8 & AL-G9. At 30x14x57mm the sensor is not only more compact and more powerful, but the optimised cable routing also makes it even easier to install in the vehicle. In addition, the AL Priority is now a patented, TÜV-tested parking assistant with E approval mark, and meets all the standards of the automotive industry required for trouble-free operation in your vehicle. The ALP offers you reliable protection against speed checks with all laser guns currently used in Europe. Despite its very small dimensions, the ALP therefore offers effective and efficient protection against laser guns. The ALPriority laser jammer can be used both as a parking sensor and as a laser jammer.
Note: To cover the whole vehicle area, we recommend the version with 2 sensors for use on a car or SUV. If you also want to protect the rear of the vehicle as well as the front, you will need 4 sensors. Motorcycles only need the basic version with one sensor, or two sensors for front and rear protection.
Overview: Antilaser AL-Priority laser jammer
- small, compact laser sensor
- can be used as a laser-based parking assistant
- laser warning or active laser jamming against all laser measurements
- CE and E approval mark certified
Scope of delivery: Antilaser AL-Priority laser jammer
- laser sensor (1 / 2 / 3 / 4 or 5 sensors, depending on selection)
- control unit
- cable set, LED display and dimmer
- mounting accessories (mounting plate, screws, cable ties)
- user manual
- 3 years’ warranty
Advantages
- small, compact laser sensor
- can be used as a laser-based parking assistant
- laser warning or active laser jamming
- CE and E approval marks
- control unit accepts up to five sensors
Technical data
| Sensor | 30 × 14 × 57 mm, weight of sensor + cable 57 g + 160 g, sensor cable 1 m + 4 m |
|---|---|
| Control unit | 100 × 22 × 50 mm |
| Operating voltage | 10 – 17 V |
| Current consumption | max. 1,500 mA |
| Operating temperature | −20 to +60 °C |
| Laser | 905 nm, laser class 1M |
| Connectable sensors | up to 5 |
| Type approval | e26 (1058) |
| Warranty | 3 years |
Difference to the Lasertrack Flare
With the AL-Priority system, the number of sensors and the accessories determine the configuration; the control unit accepts up to five sensors. The Target Lasertrack Flare is also a remote control for garage and gate openers and works with sensors in the radiator grille.
Matching accessories
Antilaser ALP RX sensor, ALP Connect Bluetooth module, HiFi set for AL Priority. More devices of this type: Laser jammers.
Installation: If you do not wish to install the system yourself, our Installation Service will put you in touch with installation partners in Hamburg, Hanover, Vienna, Salzburg and Klagenfurt.
Frequently asked questions
For a car or SUV we recommend the version with 2 sensors. If the rear of the vehicle is also to be protected, 4 sensors are required. Motorcycles need the version with one sensor, or two sensors for front and rear.
According to the manufacturer, the control unit accepts up to five laser sensors.
Yes, a compatible radar detector can be connected using the AL Priority Radar Module, for example Valentine One, Beltronics STiR or Stealth 3. You will find the module in the Accessories category.
Français
Italiano
Deutsch
Español
Български
Nederlands
Suomi
Ελληνικά
Norsk bokmål
polski
Português
Română
Svenska




Chevier –
Technisch Top, Sensoren könnten etwas kleiner sein. Für den Einbau hat die Werkstatt knapp 3 Stunden gebraucht, das muss man im Preis noch einkalkulieren. Bisher wurden aber alle Laserpistolen und auch die Blitzersäulen gemeldet und ich bin save durchgefahren.